Allen Products 2-0880 U-Bracket    

• Model 2-0880
• Fits Mackie SRM450 & C300
• Color:  Black
• The SRM450 speaker mounts vertically in this bracket NOT horizontally
• Priced and sold in Pairs
  

These speaker mounts install and aim loudspeakers from walls, ceiling, under balconies, overhangs and other structural surfaces. Loudspeakers rotate on one axis to acquire the tilt angle desired and then locking it into position.

Flexible features allow the mount to be installed under trussing with beam clamps, atop tripod stands or with threaded rod, all without drilling holes. American standard hardware is included, and metric hardware is available separately.

For anchoring into wall studs, mounting holes are offset in the brackets' base and placed on 12", 16" and 20" centers, depending on the width of the mount. Side arm slots increase the bracket's range of installation positions and sound isolation gaskets are included to isolate sound between the wall (or ceiling) and the speaker. These gaskets also protect the speakers' finish.

These speaker mounts install and aim loudspeakers from walls, ceilings, under balconies, overhangs and other structural surfaces. Loudspeakers rotate on one axis to acquire the tilt angle desired and then locking it into position. Flexible features allow the mount to be installed under trussing with beam clamps, atop tripod stands or with threaded rod, all without drilling holes. American standard hardware is included, and metric hardware is available

separately.

For anchoring into wall studs, mounting holes are offset in the brackets’ base and placed on 12”, 16” and 20” centers, depending on the width of the mount. Side arm slots increase the bracket’s range of installation positions and sound isolation gaskets are included to isolate sound between the wall (or ceiling) and the speaker. These gaskets also protect the speakers’ finish.

Specifications:

Material: Alloy steel plate

Finish: Powder coat paint

Color: Black

Working load: See reference chart

Design factor: 10:1 ratio

Pack count: 2/carton

Hardware Kit:

Includes an assortment of 1/4”, 5/16” and 3/8” bolts and hardware plus two each

of 1/8” and ¼” thick sound isolation gaskets.

Metric hardware is available separately.

Hardware for mounting to the wall or ceiling structure is not included.

Optional Accessories:

• Metric bolt kit (for M6, 2-1420 for M8, 2-1430 and for M10, 2-1440)
• Safety Cable Kit (Standard length of 12,16, 25,40,80,154 and 180 inches)
• Snap On Cover Plate (Available in black and white)
• Truss clamps up to 2” diameter
• Beam clamps up to 7” wide beam
• Tripod adapters-standard 5” hole patterns
• Threaded rod, 1/4”-1/2” diameter up to 6’-0”
• Polestar adapts speaker mount to poles and columns