ASHLY MQX-2310 stereo 31-band - 2 rack space Graphic EQ
Architect Specifications
MQX-2310
The graphic equalizer shall be stereo (2 channels). Each channel shall consist of 31 bands centered on standard ISO frequencies at intervals of 1/3 octave and covering a frequency range of 20Hz to 20kHz. Individual bands shall be activated by linear slide faders with a 25mm travel, and a tactile center detent. The range of equalization per band shall be either ±6dB or ±15dB selected via a 2- position switch.
The equalizer shall have a gain of unity with all sliders centered, and shall have a maximum in/out level of +23dBu. Frequency response shall be ±.25dB 20Hz to 20kHz. Hum and noise shall be at least -92dBu and SMPTE intermodulation distortion or THD shall be less than .01% at +20dBu. Input impedance shall be 20k ohm balanced, 10k ohm unbalanced. Output impedance shall be 200 ohm balanced, 100 ohm unbalanced. Inputs and outputs shall be active (tranformerless) balanced type on both XLR, 1/4. phone jacks and euroblock terminals. Individual filters shall be Weinbridge type and connected in a summing circuit optimized for minimum filter interaction and constant bandwidth at any slider setting. Boost and cut characteristics shall be fully symmetrical, with the filter being electrically removed from the circuit in the center (flat) position. Individual filters shall be accurate to within 3% of indicated center frequency and shall be non-adjustable to insure long term accuracy.
The equalizer shall also include an 18dB per octave high pass filter at 40Hz, equipped with a bypass switch. Green signal presence and red clip indicators shall show critical operating levels. Input gain shall be adjustable over -infinity to +6dB, and an overall EQ bypass switch shall be included. The equalizer shall weigh 8.5 lbs net and mount in a standard 19. rack using 2 spaces (3.5. high). The power requirement shall be 100-240VAC, 50-60Hz, 24W. The unit shall be an Ashly Audio MQX-2310.
MQX2310
Type: Constant Q Wein-Bridge
Number: 2x31
Bandwidth: 1/3 Octave
Tolerance: +/-3%
Range: +/-15dB
Subsonic: 18dB/Octave @40Hz
POWER REQUIREMENTS
100-240VAC, 50-60Hz, 24W
SHIPPING WEIGHT
MQX2150: 14lb.
MQX2310: 16lb.
DIMENSIONS
MQX2150: 19"W x 1.75"H x 8"D
MQX2310: 19"W x 3.5"H x 8"D
