The CPL42-94 is a small and versatile, two-way full-range bass reflex loudspeaker system engineered for installation in theaters, houses of worship and corporate applications. CPL systems may be ordered to match your specific applications. There is a choice of two HF horns for the CPL42. The 90 x 40 (CPL42-94) and the 60 x 40 (CP42-64) horns are both rotatable for narrower horizontal coverage or for vertical mounting. CPL systems may be ordered with a variety of Tuf-Coat™ finishes - black, with a black perforated steel grille, white with removable white grille cloth covering the grille, and unfinished wood, with removable brown grille cloth covering the metal grille. Five year limited warranty.
Applications:
• Theatres / Auditoria
• Houses of Worship
• Sport Facilities
• Health Clubs
• Clubs
• A/V Systems
Features:
• Black, White Tuf-Coat™, or Unfinished Exterior
• 1" Titanium HF with 3 Position Level Switch
• 60º H x 40º V Rotatable Horn Pattern
• Passive and Biamp Operating Modes
• PowerSense™ DDP (Dynamic Driver Protection)
• Small Profile Trapezoidal Enclosure For Tight Spaces
• Load-rated 3/8" Rigging Points
• No Handles for Clean Appearance
• Barrier Strip Input on Steel Input Panel
OPTIONS (please specify when ordering or CPL42-64B in Black will be shipped):
CPL42-64B = black Tuf-Coat™ finish,
CPL42-64W = white Tuf-Coat™ finish,
CPL42-64U = unfinished ready to paint or stain
Grille: white has white cloth covering,
unfinished has brown cloth covering
Loudspeaker Type: 2-way, Full-range, bass ported
Operating Range: 70 Hz - 18 kHz, 70 Hz - 18 kHz (+/-5dB)
Max Input (Passive): 200W continuous, 500W program
40 volts RMS, 89 volts momentary peak
Recommended Power Amp: 420W to 600W @ 8 Ohms
Max Inputs (Biamp):
LF: (Same as for Passive mode)
Recommended LF Power Amp: (Same as for Passive mode)
HF: 50W continuous, 125W program
20 volts RMS, 45 volts momentary peak
Recommended HF Power Amp: 100W to 150W @ 8 Ohms
Sensitivity 1W/1m :
99 dB SPL (70 Hz - 18 kHz 1/3 octave bands)
97 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 122 dB SPL / 129 dB SPL (peak)
Nominal Impedance (passive): 8 Ohms
Min Impedance: 5.6 Ohms @ 180 Hz
Nominal Impedances (Biamp): LF: 8 Ohms, HF: 8 Ohms
Nominal -6dB Beamwidth:
55° H (+3° / -13°, 2 kHz - 10 kHz)
40° V (+7° / -6°, 2 kHz - 10 kHz)
Axial Q / DI: 32.8 / 15.2, 2 kHz - 10 kHz
Crossover Frequency: 2 kHz
Recommended Signal Processing: 60 Hz high pass filter
Drivers: LF (1) 12", Ferrofluid-cooled HF (1) 1" exit, titanium diaphragm
Driver Protection: PowerSense™ DDP
Input Connection: (5) terminal barrier strip
Controls: Passive / Biamp switch, 3 position HF level switch
Enclosure: 13-ply 18 mm Baltic birch, Tuf-Coat™ finish (see options)
Enclosure Hardware: None
Mounting / Rigging Provisions:
(6) 3/8-16 rigging points, W.L.L. 150 lb. vertical pull each
(4) 5/16-18 wall/ceiling bracket attachment points
Grille: 16 gauge perforated steel, black powder coated (see options)
Required Accessories: None
Supplied Accessories: None
Optional Accessories: 3/8EYBLTKIT: (4) 3/8-16 forged eyebolts
Dimensions:
Height: 23.9 in. / 608 mm
Width (front): 14.7 in. / 373 mm
Width (rear): 9.2 in. / 234 mm
Depth: 14.75 in. / 375 mm
Weight: 53.5 lb. / 24.3 kg
Shipping Weight: 57 lb. / 25.9 kg
NOTES:
1. Sensitivity: Free field pink noise measurement at 20 feet (6.1m) at 25% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.
.png)
.png)