Loudspeaker Type: 2-way, Full-range, bass ported
Operating Range: 50 Hz - 18 kHz, 50 Hz - 18 kHz (+/-5dB)
Max Input (Passive): 200W continuous, 500W program
40 volts RMS, 89 volts momentary peak
Recommended Power Amp: 420W to 600W @ 8 Ohms
Max Inputs (Biamp):
LF: (Same as for Passive mode)
Recommended LF Power Amp: (Same as for Passive mode)
HF: 50W continuous, 125W program
20 volts RMS, 45 volts momentary peak
Recommended HF Power Amp: 100W to 150W @ 8 Ohms
Sensitivity 1W/1m:
98 dB SPL (50 Hz - 16 kHz 1/3 octave bands)
98 dB SPL (250 Hz - 4 kHz speech range)
Maximum Output: 121 dB SPL / 128 dB SPL (peak)
Nominal Impedance (passive): 8 Ohms
Min Impedance: 5.3 Ohms @ 190 Hz
Nominal Impedances (Biamp): LF: 8 Ohms, HF: 8 Ohms
Nominal -6 dB Beamwidth:
50° H (+4° / -10°, 2 kHz - 10 kHz)
35° V (+7° / -2°, 2 kHz - 10 kHz)
Axial Q / DI: 21.2 / 13.3, 2 kHz - 10 kHz
Crossover Frequency: 2 kHz
Recommended Signal Processing: 40 Hz high pass filter
Drivers: LF (1) 15", Ferrofluid-cooled
HF (1) 1" exit, titanium diaphragm
Driver Protection: PowerSense™ DDP
Input Connection: (5) terminal barrier strip
Controls: Passive / Biamp switch, 3 position HF level switch
Enclosure: 13-ply 18 mm Baltic birch, Tuf-Coat™ finish (see options)
Enclosure Hardware: None
Mounting / Rigging Provisions:
(6) 3/8-16 rigging points, W.L.L. 150 lb. vertical pull each
(4) 5/16-18 wall/ceiling bracket attachment points
Grille:16 gauge perforated steel, black powder coated (see options)
Required Accessories: None
Supplied Accessories: None
Optional Accessories: 3/8EYBLTKIT: (4) 3/8-16 forged eyebolts
Dimensions:
Height: 26.5 in. / 673 mm
Width (front): 19.75 in. / 502 mm
Width (rear): 13 in. / 331 mm
Depth: 17.9 in. / 455 mm
Weight: 64 lb. / 29 kg
Shipping Weight: 71 lb. / 32.2 kg
1. Sensitivity: Free field pink noise measurement at 20 feet (6.1m) at 25% power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.