The CPL43 is a small and versatile two-way full-range bass reflex loudspeaker system engineered for installation in theaters, houses of worship and corporate applications.
CPL systems may be ordered to match your specific applications. There is a choice of two HF horns for the CPL43 - a 90 x 40 (CPL43-94) and a 60 x 40 (CPL43-64). CPL systems may be ordered with a variety of finishes - black Tuf-Coat™ with a black perforated steel grille, white Tuf-Coat™ with removable white grille cloth covering the grille, and unfinished wood with removable brown grille cloth covering the metal grille. Five year limited warranty.
Applications
- Theatres / Auditoria
- Houses of Worship
- Sport Facilities
- Health Clubs
- Clubs
- A/V Systems
Features
- Black, White Tuf-Coat™, or Unfinished Exterior
- 1" Titanium HF with 3 Position Level Switch
- 90º H x 40º V Rotatable Horn Pattern
- Passive and Biamp Operating Modes
- PowerSense™ DDP (Dynamic Driver Protection)
- Small Profile Trapezoidal Enclosure For Tight Spaces
- Load-rated 3/8" Rigging Points
- No Handles for Clean Appearance
- Barrier Strip Input on Steel Input Panel
| Loudspeaker Type |
2-way, Full-range, bass ported |
| Operating Range |
50 Hz - 18 kHz
50 Hz - 18 kHz (+/-5dB) |
| Max Input Ratings |
200W continuous
500W Program
40 volts RMS,
89 volts momentary peak |
| Recommended Power Amplifier |
420W to 600W @ 8 Ohms |
| Sensitivity 1W/1m |
98 dB SPL (50 Hz - 16 kHz 1/3 octave bands)
98 dB SPL (250 Hz - 4 kHz speech range) |
| Maximum Output |
121 dB SPL / 128 dB SPL (peak) |
| Nominal Impedance |
8 Ohms |
| Min Impedance |
5.3 Ohms @ 190 Hz |
| Nominal -6db Beamwidth |
80° H (+0° / -26°, 2 kHz - 10 kHz)
35° V (+16° / -9°, 2 kHz - 10 kHz) |
| Axial Q / DI |
21.2 / 13.3, 2 kHz - 10 kHz |
| Crossover Frequency |
2 kHz |
| Recommended Signal Processing |
40 Hz high pass filter |
| Drivers |
LF (1) 15", Ferrofluid-cooled
HF (1) 1" exit, titanium diaphragm |
| Driver Protection |
PowerSense™ DDP |
| Input Connection |
(5) terminal barrier strip |
| Controls |
Passive / Biamp switch
3 position HF level switch |
| Enclosure |
13-ply 18 mm Baltic birch |
| Finish |
Black or white Tuf-Coat™ |
| Enclosure Hardware |
None |
| Mounting / Rigging Provisions |
(6) 3/8-16 rigging points, W.L.L. 150 lb. vertical pull each
(4) 5/16-18 wall/ceiling bracket attachment points |
| Grille |
16 gauge perforated steel |
| Required Accessories |
None |
| Supplied Accessories |
None |
| Optional Accessories |
(4) 3/8-16 forged eyebolts - 3/8EYBLTKIT |
| Dimensions |
Height: 673 mm (26.5")
Width (front): 502 mm (19.75")
Width (rear): 331 mm (13")
Depth: 455 mm(17.9") |
| Shipping Weight |
79 lb |
.png)
.png)