The CPL55 is a versatile high-efficiency subwoofer designed for installation with any of the CPL full-range loudspeaker systems for extended deep bass output with exceptional punch. The CPL55 subwoofer has an integral 150 Hz high pass output filter that can be used to directly feed XLT41E, CPL42, or CPL43 full range systems, thus requiring only one amplifier channel to power both systems. When used with larger CPL full-range system, a separate amplifier channel is recommended for each system. Five year limited warranty.
Product Details
Loudspeaker Type: Ported subwoofer
Operating Range: 40 Hz - 150 Hz 40 Hz - 150 Hz (+/-5dB)
Max Input Ratings: 300W continuous, 750W program 35 volts RMS, 77 volts momentary peak
Features
- Black, White Tuf-Coat™ finish, or Unfinished Exterior
- Dual 15" Ferrofluid-cooled Woofers
- Four Ports for Proper LF Tuning
- PowerSense™ DDP (Dynamic Driver Protection)
- Small Profile Trapezoidal Enclosure For Tight Spaces
- Load-rated 3/8" rigging points
- No Handles for Clean Appearance
- Barrier Strip Input on Steel Input Panel
Operating Range: 40 Hz - 150 Hz
40 Hz - 150 Hz (+/-5dB)
Max Input Ratings: 300W continuous, 750W program
35 volts RMS, 77 volts momentary peak
Recommended Power Amplifier: 630W to 900W @ 4 Ohms
Sensitivity 1W/1m: 98 dB SPL (40 Hz - 160 Hz 1/3 octave bands)
Maximum Output: 123 dB SPL / 130 dB SPL (peak)
Nominal Impedance: 4 Ohms
Min Impedance: 4.4 Ohms @ 50 Hz
Nominal -6 dB Beamwidth: 360° H x 360° V
Axial Q / DI: 1 / 0, 40 Hz - 150 Hz
High Pass Output: 150 Hz
Recommended Signal Processing:
100 Hz - 150 Hz electronic crossover
30 Hz high pass filter
Drivers: LF (2) 15", Ferrofluid-cooled
Driver Protection: PowerSense™ DDP
Input Connection: (5) terminal barrier strip
Controls: None
Enclosure: 13-ply 18 mm Baltic birch, Tuf-Coat™ finish (see options)
Enclosure Hardware: None
Mounting / Rigging Provisions:
(6) 3/8-16 rigging points, W.L.L. 150 lb. vertical pull each
Grille:16 gauge perforated steel, black powder coated (see options)
Required Accessories: None
Supplied Accessories: None
Optional Accessories:
3/8EYBLTKIT: (4) forged 3/8-16 eyebolts
Digital system controller
Dimensions:
Height: 41.5 in. / 1054 mm
Width (front): 19.75 in. / 502 mm
Width (rear): 13 in. / 331 mm
Depth: 17.9 in. / 455 mm
Weight: 89 lb. / 40.4 kg
Shipping Weight: 100 lb. / 45.4 kg
Notes:
1. Sensitivity: Free field pink noise measurement at 40 ft. (12.2m) at
20% power; extrapolated to 1 meter and an input of 2 volts RMS.
2. Watts: All watta
.png)
.png)