The CM 4410 P is a portable conference chairman unit perfectly suited for permanent meeting rooms or temporary discussion-style meetings. The unit features a built-in high-quality loudspeaker and a fixed 14.2 in. (36 cm) gooseneck microphone with illuminated red ring to indicate microphone ON status. Each unit enables the conference chair to speak, register a request-to-speak, listen to other speakers and override delegates with the priority button. The unit can either be controlled by the microphone button or remotely by the operator. The microphone button has two LEDs to indicate whether the unit is on (RED) or in the request-to-speak queue (GREEN). The loudspeaker is automatically switched off when the microphone is activated to prevent acoustic feedback. A 6.6 ft. (2.0 m) cable is permanently connected to each unit to allow for quick and easy installation of units.
Highlights:
- Illuminated red ring - identifies speaker easily
- Push-to-talk operation introduces structure
- “Daisy Chain” loop-through cabling
- Proprietary microphone design eliminates handling noise
Specification CM 4410 P:
Audio Loudspeaker Frequency Response 150 Hz – 15 kHz
Loudspeaker diameter 3 in. (76 mm)
Loudspeaker maximum power 0.5 W RMS
Microphone Frequency Response 100 Hz – 15 kHz
Microphone Sensitivty -22 dBv/Pa
Microphone Max. SPL 125 dB (3% THD)
Microphone equivalent noise Approx. 20 dB SPL
Microphone Front/Back ratio >20 dB (1 kHz)
Controls & Indicators Microphone Button Button with Red/Green LED; red indicates microphone is active, green indicates request-to-speak
Priority Button Button to cancel all active delegate units permanently or temporarily (temp. only in FIFO mode)
Illuminated Microphone Ring Ring around the microphone head that illuminates bright red when the microphone is on
Interconnections CDS-chain Input One (1) 6.6 ft. (2.0 m) cable with a male D-sub DB15 connector with optional screws
CDS-chain Loop-through One (1) female D-sub DB15 connector with locking mechanism and optional screw terminals to connect the next unit in the CDS chain
Power Power Consumption 0.5 to 1 W
Physical Dimensions (H x W x D) (without microphone) 2.40 x 5.91 x 6.61 in. (61 x 150 x 168 mm)
Microphone length 14.2 in. (36 cm)
Color Black
Unit Weight 2.0 lbs. (0.90 kg)
Shipping Weight 3.0 lbs. (1.36 kg)
Mounting Tabletop (portable or semi-flush mounted)
