OXMOOR RC-16 Remote Volume Control
The RC-16 is our rotary remote control for use with our DCA-2T digital control attenuator. Features Virtual Pointer™ display. The rotary knob will turn continuously without mechanical stops. Uses six-pin RJ-11 (modular phone plug) connections. Requires two-gang mounting plate.
RC-16 Part Number: 2500003
Product specifications
| Control |
Type |
Incremental Rotary Bi-phase Encoder with Quadrature-to-Pulse Conversion Circuit |
| Display |
Light-Emitting Diodes |
Multiplexed Display Refreshed at Line Frequency Rate by Serial Data Burst. One of 16 Concentric Light-Emitting Diodes (LEDs) is illuminated as a Virtual Pointer |
| Control Loop |
Maximum Controls Per Channel |
4 |
| Maximum Channels Per Control Loop |
64 |
| Maximum Cable Length |
600m (2000 ft)1 |
| Contact Requirements |
Single-Pole Switch or Open Collector Transistor (128 mA capacity), Dry Closure to Logic Ground |
| Wiring Scheme |
Daisy-Chained Connection Via Looping Jacks |
| Cable and Connectors |
6-Wire Modular Telephone type RJ-11/12 |
| Lockout |
Key Switch |
Single-Pole Dry Closure, 25 mA Capacity |
| Safety Listing |
City Of Los Angeles |
| Mechanical |
Front Dimensions |
578 mm (2.28 in) Square
203 mm (0.8 in) Above Panel Surface
|
| Rear Dimensions |
533 mm (2.1 in) Diameter
406 mm (1.6 in) Below Front Panel Surface
|
| Maximum Mounting Panel Thickness |
9.6 mm (0.38 in) |
| Minimum Required Depth |
437 mm (1.72 in) Below Front Panel Surface Including Connectors |
| Finish |
Matte Black Injection Molded High-Impact Plastic Escutcheon and Knob. Black Painted Can |
| Weight |
Shipping: 454 grams (1.0 lb)
Net: 114 grams (0.25 lb)
|
1 Total length based on typical modular telephone cable resistance of 12 ohms per 100m (330 ft).
Specifications subject to change without notice. The term RC-16 is a trademark of the Oxmoor CorporatiON.
Architect and engineer's specifications
Rotary remote control for Oxmoor DCA-2T Digital Control Attenuator. Sixteen concentric LEDs provide virtual pointer display. Multiplexed display refreshed at line frequency rate by serial data burst; single illuminated LED gives visual level reference. Control performs incremental rotary bi-phase encoding using a quadrature-to-pulse conversion circuit. Data ports (IN and OUT for DCA-2T connection and "daisy chaining"): RJ-11 type modular phone jacks; accept 4-wire plug for volume control and display or 6-wire RJ-11 type plug for remote activation of Preset or Priority function of DCA; allow "daisy-chain" loop wiring scheme between each control and device controlled. A 5-pin junction block provides connection points for a security key switch and both preset and priority activation. Maximum cable length between remote and controlling device: 600m (2000ft), referenced to a cable resistance of 12 ohms/100m.
Acceptable: Oxmoor RC-16
