Crown CDI2000 Amplifier, 120v-240v, Nema 5-15p, 1.4v - FREE UPS GROUND SHIPPING IN CONTINENTAL U.S.!

The CDi2000 from Crown® amplifiers is a professional tool designed and built for installed sound applications. It is rugged and lightweight, and offers unmatched value in its class.

CDi2000 amplifiers feature an intuitive front-panel LCD screen to guide installers through their configurations. CDi amplifiers also offer onboard DSP for loudspeaker signal processing. Other features include a switch-mode universal power supply, useful function indicators, proportional-speed fan-assisted cooling, removable Phoenix-style inputs, barrier strip outputs for low-Z or 70V/140V loads, short-circuit protection and more.

Features

HiQnet™ System Architect™ software with support for CDi Series
Now Available!

Click here for more information

Minimum Guaranteed Power CDi 1000 CDi 2000 CDi 4000 Per channel, both channels driven 2 ohm Dual (per channel) 4 ohm Dual (per channel) 8 ohm Dual (per channel) 4 ohm Bridge-Mono 70V Dual (per channel) 140V Bridge-Mono 700W* 500W 275W 1,400W* 500W 1,000W 1,000W* 800W 475W 2,000W* 800W 1,600W 1,600W* 1,200W 650W 3,200W* 1,000W 2,000W With 0.5% THD *With 1% THD Crown CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes three models which are identical except for output power: CDi 1000, CDi 2000, and CDi 4000. All are rugged and lightweight, and offer unmatched value in their class. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.

Specifications Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A At idle: Draws no more than 45 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Dual Bridge mono 2–8 ohms 4–16 ohms Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB Sensitivity (at 8 ohm rated output) 1.4V Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

PRICE GUARANTEE  If you find a lower advertised price from any authorized U.S. Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CDI4000 Amplifier Contractor Series - FREE UPS GROUND SHIPPING IN CONTINENTAL U.S.!

The CDi 4000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 4000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.

Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 4000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.

Key Features
•	Rugged and lightweight steel construction
•	Operates in dual or bridge-mono modes
•	Rack mountable
•	Excellent sound reproduction with low distortion
•	Advanced protection circuitry protects against overheating, overloads, and shorts
•	Switch-mode universal power supply
•	Wide range of speaker impedances and outputs
•	Backlit LCD
•	Integrated DSP

HiQnet™ System Architect™ software with support for CDi Series
Now Available!

Click here for more information

Minimum Guaranteed Power CDi 1000 CDi 2000 CDi 4000 Per channel, both channels driven 2 ohm Dual (per channel) 4 ohm Dual (per channel) 8 ohm Dual (per channel) 4 ohm Bridge-Mono 70V Dual (per channel) 140V Bridge-Mono 700W* 500W 275W 1,400W* 500W 1,000W 1,000W* 800W 475W 2,000W* 800W 1,600W 1,600W* 1,200W 650W 3,200W* 1,000W 2,000W With 0.5% THD *With 1% THD Crown CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes three models which are identical except for output power: CDi 1000, CDi 2000, and CDi 4000. All are rugged and lightweight, and offer unmatched value in their class. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.

Specifications Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A At idle: Draws no more than 45 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Dual Bridge mono 2–8 ohms 4–16 ohms Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB Sensitivity (at 8 ohm rated output) 1.4V Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

Important Notice:  This is a special order item and is non-cancelable or returnable.

PRICE GUARANTEE  If you find a lower advertised price from any authorized U.S. Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CDI6000 Amplifier Contractor Series - FREE UPS GROUND SHIPPING IN CONTINENTAL U.S.!

The CDi 6000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 6000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.

Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 6000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.

Key Features
•	Rugged and lightweight steel construction
•	Operates in dual or bridge-mono modes
•	Rack mountable
•	Excellent sound reproduction with low distortion
•	Advanced protection circuitry protects against overheating, overloads, and shorts
•	Switch-mode universal power supply
•	Wide range of speaker impedances and outputs
•	Backlit LCD
•	Integrated DSP

HiQnet™ System Architect™ software with support for CDi Series
Now Available!

Click here for more information

Minimum Guaranteed Power CDi 1000 CDi 2000 CDi 4000 Per channel, both channels driven 2 ohm Dual (per channel) 4 ohm Dual (per channel) 8 ohm Dual (per channel) 4 ohm Bridge-Mono 70V Dual (per channel) 140V Bridge-Mono 700W* 500W 275W 1,400W* 500W 1,000W 1,000W* 800W 475W 2,000W* 800W 1,600W 1,600W* 1,200W 650W 3,200W* 1,000W 2,000W With 0.5% THD *With 1% THD Crown CDi Series amplifiers are professional tools designed and built for installed sound applications. The series includes three models which are identical except for output power: CDi 1000, CDi 2000, and CDi 4000. All are rugged and lightweight, and offer unmatched value in their class. Extremely versatile; rated for 2-, 4-, 8-ohm loads and 70V and 140V outputs. Switch-mode universal power supply. Intuitive front-panel LCD screen for quick, easy configuration. Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. Up to 20 user defined DSP presets are available.

Specifications Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) +0/–1 dB Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) 100 dB Damping Factor (8 ohm): 20 Hz to 400 Hz > 500 Input Stage Input is electronically balanced and employs precision 1% resistors AC Line Current CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75A At idle: Draws no more than 45 watts. Crosstalk (below rated power) 20 Hz to 1 kHz > 70 dB Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load impedance (note: safe with all types of loads) Dual Bridge mono 2–8 ohms 4–16 ohms Voltage Gain (at 1 kHz, 8 ohm rated output) CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB Sensitivity (at 8 ohm rated output) 1.4V Maximum Input Signal +22 dBu typical Operating Temperature 0° C to 40° C at 95% relative humidity (non-condensing) AC Line Voltage and Frequency Configurations Available (± 10%) 100V, 120V-240V, 50/60 Hz Ventilation Flow-through ventilation from front to back Cooling Heat sinks and proportional-speed fan Dimensions: Width, Height, Depth (behind mounting surface) EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x 12.25 in. (31.1cm) D Net Weight, Shipping Weight 19 lb (8.6kg), 22 lb (10.0 kg)

Important Notice:  This is a special order item and is non-cancelable or returnable.

PRICE GUARANTEE  If you find a lower advertised price from any authorized U.S. Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CM200A Handheld Cardioid Condenser Microphone for stage vocals, instruments, smooth articulate sound.  SALE:  $262.08

The CM Series of condenser microphones by Crown offer exceptional quality at truly affordable prices. With application-specific microphones, ranging from professional-grade headworn microphones to critical-response microphones for the most demanding recording applications, the CM Series can fit most any microphone need. Types include hand-held, headworn, hanging, or stand-mounted.

With innovations such as Crown’s patented Differoid® technology, the CM series combines years of technical know-how with durable, high-quality materials and workmanship. These qualities are direct contributors to the successful performances of our customers, and a primary reason for the success Crown enjoys today.

   

Transducer	Condenser
Polar Pattern	Cardioid
Frequency Response	80Hz to 15kHz
Dynamic Range (Typical)	not specified by manufacturer
Signal-to-Noise Ratio	72.5dB @ 94dB SPL
Maximum Input Sound Level	151dB SPL (48V supply)
Power Requirements	12 - 48V Phantom Power
Output Impedance	150 ohms
Output Connectors	3-pin XLR
Pad	No
Low Frequency Roll-Off	No
Dimensions	7.53 x 1.80" (191.2 x 45.7mm) (Length x Diameter)

Pro Sound Service Inc. is an authorized distributor of Crown Products!  We are your best source for quality products at great prices.

Call us at 781-849-1285 if you have any questions about ordering this product.

Crown CM200ASW Handheld Cardioid Condenser Microphone w/Switch   SALE:  $289.95

The CM Series of condenser microphones by Crown offer exceptional quality at truly affordable prices. With application-specific microphones, ranging from professional-grade headworn microphones to critical-response microphones for the most demanding recording applications, the CM Series can fit most any microphone need. Types include hand-held, headworn, hanging, or stand-mounted.

With innovations such as Crown’s patented Differoid® technology, the CM series combines years of technical know-how with durable, high-quality materials and workmanship. These qualities are direct contributors to the successful performances of our customers, and a primary reason for the success Crown enjoys today.

Crown CTS1200 Amplifier - FREE SHIPPING IN CONTINENTAL U.S.!

Specifications

• Frequency Response (at 1 watt, 20Hz-20kHz): +/- 0.25dB
• Signal to Noise Ratio below rated power (20Hz to 20kHz): 105dB A-weighted
• Total Harmonic Distortion (THD) at full rated power, from 20Hz to 20kHz:<0.35%
• Damping Factor: 10Hz to 100Hz: >3000
• Crosstalk (below rated power, 20Hz to 1kHz): >80 dB
• Common Mode Rejection (CMR, 20Hz to 1kHz): 50 dB
• DC Output Offset: <2mV
• Input Impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced
• Maximum Input Level: +20dBu before input compression, +32dBu absolutemaximum
• Load Impedance (safe with all types of loads): Stereo: 2/4/8/16 ohms, 70V,100V. Bridge Mono: 4/8/16 ohms, 140V, 200V
• Voltage Gain (at maximum level setting): 8/4 ohm operation, 1.4Vsensitivity: 63.9:1 (36dB)
• Cooling: Continuously variable speed forced air, front-to-back airflow
• Dimensions (W x H x D): 19" x 3.5" x 14.25"
• Weight: 23.4 lbs (net); 28.3 lbs (shipping) 

Crown CTS 1200LITE - FREE SHIPPING IN CONTINENTAL U.S.!

Crown CTS 1200 LITE Description:

The Crown CTs-1200 is a 2-Channel power amplifier housed in a 2-space rackmount frame, offering power levels and features meant to serve fixed installation sound applications. This amplifier is notable for a completely independent array of switches and indicators for each channel, including high and low impedance operation, input sensitivity, high pass filters, and an advanced level of well designed overload protection circuitry. This unit also includes a PIP-LITE module for networking via HiQnet and System Architect or TCP/IQ and IQwic.

Crown CTS 1200LITE Features:

• High-power, 2-channel, 2U rackmount amplifier for installed sound applications
• Switching power supply lowers overall amplifier weight
• Direct 70V/100V/140V/200V constant-voltage or 2/4/8 Ohm low-impedance operation
• Independently selectable Input Sensitivity switching per channel
• Rear panel Programmable Input Processor(PIP2) connector accepts accessory expansion modules for specific custom installation requirements
• Thermal Level Control(TLC) circuitry protects amplifier from overheating; engages input compressor, dynamically reducing input gain when individual channels overheat
• Junction Temperature Simulation (JTS) quick-activation circuitry limits drive level of output devices to tolerable range if excess power is required; protects output transistors without shutting down channel
• Continuously variable fan cooling; venting with front-to-rear forced airflow
• Removable balanced terminal block input connectors with "Y" switch
• Switchable high pass filter per channel, eliminates step down transformer saturation in distributed systems
• Complete array of front panel function and warning indicator LEDs for each channel
• Complete array of rear panel function and filter switches
• Power on indicator flashes when AC mains are under or over voltage
• Advanced protection circuitry covers shorted outputs, DC, mismatched loads, overheating, high frequency overloads, voltage fluctuation and internal faults.

PRICE GUARANTEE  If you find a lower advertised price from any authorized U.S. Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CTS 2000 Amplifier - FREE SHIPPING IN CONTINENTAL U.S.!

Building on the foundation of the Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Specifications

• Frequency Response (at 1 watt, 20 Hz - 20 kHz): ±0.25 dB.
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz): 105 dB A-weighted.
• Total Harmonic Distortion (THD) at full rated power, from 20 Hz to 20 kHz: CTs 600/1200:"< 0.1%. CTs 2000/3000 < 0.35%.
• Damping Factor: 10 Hz to 100 Hz: > 3000.
• Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB.
• Common Mode Rejection (CMR) (20 Hz to 1 kHz): 50 dB.
• DC Output Offset: < 2 mV.
• Input Impedance (nominal): 10 kilohms balanced, 5 kilohms unbalanced.
• Maximum Input Level: +20 dBu before input compression, +32 dBu absolute maximum.
• Load Impedance (Note: Safe with all types of loads):
  CTs 600/1200: Stereo: 2/4/8/16 ohms, 70V." Bridge Mono: 4/8/16 ohms, 140V.
• CTs 2000/3000: Stereo: 2/4/8/16 ohms, 70V, 100V." Bridge Mono: 4/8/16 ohms, 140V, 200V.
• Voltage Gain (at maximum level setting): 8/4 ohm operation, 1.4V sensitivity
  CTs 600 35:1 (31 dB)
  CTs 1200 50:1 (34 dB)
  CTs 2000 63.9:1 (36 dB)
  CTs 3000 71.4:1 (37 dB)
  26 dB: 20:1 (26 dB).
  70V operation, 1.4V sensitivity or 100V operation, 2.0V sensitivity: 50:1 (34 dB).
• Required AC Mains (+15%, –25%): 120V/60 Hz, 230V/50 Hz.
• Power Draw at Idle (120VAC mains): CTs 600/1200: 24W (standby mode)
  CTs 2000/3000: 35W (standby mode).
• Cooling: Continuously variable speed forced air, front-to-back airflow.
• Dimensions: 19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 14.25 in. (36.2 cm) D.
• Weight: Net, Shipping
  CTs 600: 22.8 lb (10.3 kg), 27.7 lb (12.6 kg)
  CTs 1200: 23.4 lb (10.6 kg), 28.3 lb (12.8 kg)
  CTs 2000: 27.0 lb (12.2 kg), 32.0 lb (14.5 kg)
  CTs 3000: 27.7 lb (12.6 kg), 32.7 lb (14.8 kg).

Front Panel Controls and Indicators

• Bridge Mode Indicator: Yellow LED illuminates when the rear-panel Mode Switch is set to the "Bridge” position.
• Ready Indicator: Green LED, one per channel, illuminates when the channel is initialized and ready to produce audio output. Indicator is off when PIP puts the amplifier in standby mode via the IQ system.
• Signal Indicators: Three green LEDs per channel indicate the amplifier’s input and output signal levels.
• Signal: input signal is above –40 dBu."–20 dB: amplifier output is 20 dB below clipping."–10 dB: amplifier output is 10 dB below"clipping.
• Clip Indicator: Red LED, one per channel, illuminates when the channel’s output signal reaches the onset of audible clipping. The Clip Indicator also will illuminate during Thermal Level Control (TLC) limiting or when the input compressor/limiter is protecting the amplifier from input overload.
• Thermal Indicator: Red LED, one per channel, illuminates when the channel has shut down, or is very near shutting down, due to thermal stress or overload.
• Fault Indicator: Red LED, one per channel, flashes when the amplifier output channel has stopped operating.
• Data Indicator: Yellow LED indicates IQ Loop data activity (if the amplifier is equipped with an IQ-PIP2 module, and connected to an IQ Loop).
• Power Indicator: Blue LED indicates amplifier has been turned on and AC power is available. The LED will flash when the AC line voltage is 15% above or 25% below the nominal rated value.
• Cooling Vents: Front-to-rear forced airflow.
• Power Switch: Push-on / push-off switch."

Back Panel Controls and Connectors

• Power Cord Connector: Standard 15 amp IEC inlet. Voltage is indicated above IEC inlet.
• Reset Switch: Resets the circuit breaker that protects the power supply.
• Speaker Connectors: One four-pole touch-proof terminal strip. Accepts up to 10 AWG terminal forks.
• Input Connectors: Balaced 3-pin terminal block connectors, one per channel, on the standard PIP2-BBY module.
• Channel Level Control: One 21-position detented rotary attenuator per channel, ranging from minus infinity (–70 dB) to 0 dB gain.
• Mode Switch: Two-position switch is used to select the amplifier’s mode of operation: Dual or Bridge-Mono.
• Highpass Filter: One 3-position switch per channel selects between OFF, 35Hz and 70Hz 3rd-order filters.
• "Y” Input Switch: When set to ON, this switch parallels the input signals of the two channels, for use when the input signal is mono. Also can be used to daisy-chain the signal to another amplifier.
• Ventilation Grille: Front-to-rear forced airflow.

Options

• PIP2 modules, including the IQ-PIP-Lite, IQ-PIP-USP3, and IQ-PIP-USP3/CN (Call us at  781-849-1285 for details)

Protection Systems

• Thermal Level Control (TLC): If an amplifier channel starts to overheat, the TLC system will engage the input compressor. By compressing the input, the amplifier will not generate as much heat and will have a chance to cool down.
• Junction Temperature Simulation (JTS): In the CTs 600/1200, if excess power is demanded, JTS circuitry limits the drive level of the output devices to a safe range, preventing damage.
• Fault: The amplifier will light the Fault LED if the amplifier output stage stops operating.
• AC Under/Over Voltage Protection: If the AC line voltage drops below 25% or rises above 15% of the nominal operating voltage of the amplifier, the amplifier’s power supply turns off and the blue Power LED flashes. The amplifier will turn back on when the AC line voltage returns to safe operating levels.
• Circuit Breaker: This breaker protects the amplifier from excessive AC current draw.
• DC Output Servo: The output servo circuit protects your drivers by eliminating DC offset, even in the presence of very large asymmetrical signals.
• Inrush Limiting: A soft-start circuit in the power supply minimizes the amplifier’s current draw during power-on.
• Variable-speed Fan: Two continuously variable speed fans direct the airflow through the amplifier for cooling.

Pro Sound Service Inc. is your authorized dealer of Crown Audio!  We are your best source for brand-new factory sealed Crown products at the most competitive prices.

Call us Toll-Free at 877-776-7631 or email us at info@prosoundservice.com for BEST PRICE.  We'll meet or beat any authorized U.S. Dealer's price.

Check out our Crown Audio Page for other great deals.

PRICE GUARANTEE  If you find a lower advertised price from any authorized Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CTS 3000 Amplifier - FREE SHIPPING IN CONTINENTAL U.S.!

Building on the foundation of the Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Crown CTS3000 Features:

• High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
• Crown Switching Power Supply for lighter weight
• Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
• 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
• Legendary Crown class-I (BCA) and AB+B output topologies offer the best in amplifier reliability
• 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
• Comprehensive array of indicators provide accurate diagnostics
• Two-channel models are fully PIP2-compatible. Multi-channel models accept MC accessory modules.

 Pro Sound Parts also offers Crown Audio CTS3000LITE, CTS3000USP3, CTS3000USP3CN - please call us at 781-849-1285 if you are interested in any of these products).

CTs 3000

Pro Sound Service Inc. is your authorized dealer of Crown Audio!  We are your best source for brand-new factory sealed Crown products at the most competitive prices.

Call us Toll-Free at 877-776-7631 or email us at info@prosoundservice.com for BEST PRICE.  We'll meet or beat any authorized U.S. Dealer's price.

Check out our Crown Audio Page for other great deals.

PRICE GUARANTEE  If you find a lower advertised price from any authorized U.S. Crown Audio Dealer, call or email us.  We’ll match any verifiable advertised price!

Crown CTs600 Amplifier - FREE SHIPPING IN CONTINENTAL U.S.!

The Crown CTS600 (CTS-600) Amplifier offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high and low-impedance operation for a specific channel, and CTS600 amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements. For added flexibility, the CTS600 includes both dual-channel and multi-channel models.

The CTS600 feature Crown’s new Switching Power Supply for lighter weight, and all models are also compatible with Harman Pro System Architect as well as the IQ System®. Two-channel models accept PIP2™ modules, and also feature selectable high-pass filters and input sensitivity for each channel. In a profession where unplanned service calls quickly wipe out profits, the CTS600 amplifiers are designed to be the most reliable amplifiers you can install.

PRODUCT FEATURES - (CTS-600)