EMAIL FOR LOWEST PRICE
Same as SH2064m but with 90º bend in throat for racetrack PA or other applications that require up-angle mounting The SH2064M is designed by Community to function as a
midrange horn in multi-way component systems or as a stand-alone, high-power announcement / paging horn. Mated with a Community M4 compression driver it will provide
focused, extremely high output sound projection, with predictable performance and exceptional long term durability. The SH2064M is particularly suited for use with the SH864 HF horn in component clusters. The horn lengths provide physical alignment of the MF and HF drivers when the horn mouths are aligned.
Performance data for Community horns is well documented, providing the designer and consultant with highly predictable and consistent coverage patterns for system design.
Each horn is a handcrafted, one-piece, precision waveguide, precision molded in hand-laminated, fiber-reinforced fiberglass. Balsa wood is embedded in the sidewalls for nondiaphragmatic, resonant-free operation. With substantial fiberglass layering and integral throat and driver flange construction, Community horns are built to withstand the
torque loads of the heaviest compression drivers. Their inherent strength and rigidity enhances sonic efficiency by preventing sound energy losses through the horn walls or
from vibration. Community fiberglass horns are inherently weather-proof under all conditions of use. There is a five year warranty. Horn Type: Pattern Control, Mid frequency horn
Operating Range: 300 Hz - 4 kHz
Usable LF Limit: 300 Hz
Flare Rate: 260 Hz
Throat Diameter: 4 inch / 102 mm
Axial Sensitivity 1W/1m (with M4 driver):
114 dB SPL (315 Hz - 2 kHz 1/3 octave bands)
Maximum Output (with M4 driver):
137 dB SPL / 144 dB SPL peak (with M4 driver)
Nominal -6 dB Beamwidth:
Horizontal: 60 degree (+10 degree / -3 degree, 630 Hz - 2 kHz)
Vertical: 60 degree (+20 degree / -10 degree, 630 Hz - 2 kHz)
Axial Q: 17.5 (630 Hz - 2 kHz)
Axial DI: 12.4 (630 Hz - 2 kHz)
Recommended Signal Processing (for M4 driver):
300 Hz and 2 kHz crossover points in a system
250 Hz high pass filter for stand-alone operation
Construction:
Hand-laminated, reinforced composite, black fiberglass
Double wall construction using embedded balsa wood
Required Accessories:
Electronic crossover, Equalization
Optional Accessories:
DSC42: Digital crossover / processor
2BKT: Rear yoke-type mounting bracket
Bolt Pattern:
(6) 5/16 inch / 8 mm holes on 12 inch / 305 mm bolt circle
Dimensions (without driver):
Height: 20.25 inch / 514 mm
Width: 23.5 inch / 597 mm
Depth: 19 inch / 483 mm
Weight: 21 lb. / 9.5 kg
Shipping Weight: 23 lb. / 10.4 kg
1. Sensitivity: Free field pink noise measurement at 25 ft / 7.6 m at
15 percent power; extrapolated to 1 meter and an input of 2.83 volts RMS.
0 dB SPL = 20 uPa.
2. Watts: All wattage figures are calculated using the rated nominal
impedance.
3. EQ: Specifications are without equalization, normally required
for optimum performance.
OPTION: For outdoor up-angle mounting, such as for audience coverage from trackside poles at a motor speedway, the SH2064M is available with a 90 degree throat as the CF2064M APPLICATIONS:
• Strong, Lightweight, Weather-Resistant, Non-Resonant
Fiberglass Construction
• Compact horn for M4 driver
• Voice Announcement Systems
• Large Public Gatherings
• Stadia and Arenas
• Race Tracks
• Houses of Worship