EMAIL FOR LOWEST PRICE
COMMUNITY R1-64Z TWO-WAY HORN LOADED WEATHER-RESISTANT FULL-RANGE LOUDSPEAKER
The R1-64Z two-way full-range loudspeaker system is engineered to provide quality full-range sound
projection in a variety of outdoor and indoor applications. Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion. The R1 loudspeakers are available in two versions. The standard version is weather-ready, with a WeatherStop™ grille and stainless steel exterior. The BNG version, with black exterior and no grille, is more suitable for indoor applications. A stainless steel mounting yoke is included.
APPLICATIONS
• Convention centers, ballrooms, arenas, malls
• Athletic fields, small arenas, athletic field houses
• Theme and amusement parks
• Fairgrounds, rodeos, air shows
• Racing tracks, skating rinks, swimming pools
• Electronic carillons
• Cruise ships
• Portable sound systems
FEATURES
• Weather-resistant, all-fiberglass enclosure
• 3-layer Weather-Stop™ grille
• Pattern control to below 500 Hz
• High efficiency
• Integral mounting points
• High power passive crossover
• High-fidelity, full-range reproduction of music and speech
• Application-specific coverage pattern
• Included stainless steel mounting yoke for easy mounting and aiming
• Optional “indoor” version available with a black enclosure and no grille (model R1-64BNG)
• Five-year product warranty / Fifteen-year enclosure warranty
Loudspeaker Type: 2-way horn loaded coaxial, weather-resistant
Operating Range: 90 Hz to 16 kHz 110 Hz to 10 kHz (±4 dB)
Max Input Ratings: 200W continuous, 500W program 40 volts RMS, 89 volts momentary peak
Recommended Power Amplifier: 420W to 600W @ 8 ohms
Sensitivity (1W/1m): 105 dB SPL (100 Hz to 16 kHz 1/3 octave bands)
106 dB SPL (250 Hz to 4 kHz speech range)
Maximum Output: 128 dB SPL / 135 dB SPL (peak)
Nominal Impedance: 8 ohms
Minimum Impedance: 5.5 ohms @ 230 Hz
Nominal –6dB Beamwidth:
50° H (+4° / -19°, 1 kHz to 16 kHz)
35° V (+7° / -5°, 1 kHz to 16 kHz)
100° H x 100° V (400 Hz)
Axial Q / DI: 31.5 / 15, 1 kHz to 16 kHz
Crossover Frequency: 1.2 kHz
Recommended Signal
Processing: 90 Hz high pass filter
Drivers: LF 1 x 12” weather-treated, Ferrofluid-cooled HF 1 x 1” exit, titanium diaphragm
Driver Protection: PowerSense™ DDP
Input Connection: 12 foot (4 m) SJOW #16 gauge
Controls: None
Enclosure: Hand-laminated fiberglass, gray gelcoat
Mounting/Rigging
Provisions: (5) 1/2-13 rigging points
Grille: 3-layer Weather-Stop™ grade 304 stainless steel
Required Accessories: 90 Hz high pass filter
Supplied Accessories: SSYR1 grade 304 stainless steel mounting yoke
Optional Accessories: TRC400 400-watt 70/100/140-volt transformer
Dimensions—Height:24.75 inches (629 mm)
Width:24.75 inches (629 mm)
Depth:29 inches (737 mm)
Weight (without yoke): 47.5 lbs (21.5 kg)
Weight (with yoke): 55.5 lbs (25.2 kg)
Shipping Weight: 86.5 lbs (39.2 kg)
NOTES:
1. Sensitivity: Free field pink noise measurement at 40 ft (12.2 m) at 25%
power; extrapolated to 1 meter and an input of 2.83 volts RMS.
2. Watts: All wattage figures are calculated using the rated nominal impedance.