Product Details

EMAIL FOR LOWEST PRICE

COMMUNITY R1-66BNG TWO-WAY HORN LOADED WEATHER-RESISTANT FULL-RANGE LOUDSPEAKER

 (same as R1-64Z, black color shell, no grille)

The R1-66Z two-way full-range loudspeaker system is engineered to provide quality full-range sound

projection in a variety of outdoor and indoor applications. Its wide range, smooth frequency response and high efficiency ensures both high fidelity music reproduction and superb projection of clear intelligible speech with very low distortion. The R1 loudspeakers are available in two versions. The standard version is weather-ready, with a WeatherStop™ grille and stainless steel exterior. The BNG version, with black exterior and no grille, is more suitable for indoor applications. A stainless steel mounting yoke is included.

APPLICATIONS

• Convention centers, ballrooms, arenas, malls

• Athletic fields, small arenas, athletic field houses

• Theme and amusement parks

• Fairgrounds, rodeos, air shows

• Racing tracks, skating rinks, swimming pools

• Electronic carillons

• Cruise ships

• Portable sound systems

FEATURES

• Weather-resistant, all-fiberglass enclosure

• 3-layer Weather-Stop™ grille

• Pattern control to below 500 Hz

• High efficiency

• Integral mounting points

• High power passive crossover

• High-fidelity, full-range reproduction of music and speech

• Application-specific coverage pattern

• Included stainless steel mounting yoke for easy mounting and aiming

• Optional “indoor” version available with a black enclosure and no grille (model R1-66BNG)

• Five-year product warranty / Fifteen-year enclosure warranty

Loudspeaker Type: 2-way horn loaded coaxial, weather-resistant

Operating Range: 90 Hz to 16 kHz 110 Hz to 10 kHz (±4 dB)

Max Input Ratings: 200W continuous, 500W program 40 volts RMS, 89 volts momentary peak

Recommended Power

Amplifier: 420W to 600W @ 8 ohms

Sensitivity (1W/1m): 105 dB SPL (100 Hz to 16 kHz 1/3 octave bands) 106 dB SPL (250 Hz to 4 kHz speech range)

Maximum Output: 128 dB SPL / 135 dB SPL (peak)

Nominal Impedance: 8 ohms

Minimum Impedance: 5.7 ohms @ 230 Hz

Nominal –6dB Beamwidth:

60° H (+18° / -20°, 1 kHz to 16 kHz)

60° V (+13° / -16°, 1 kHz to 16 kHz)

100° H x 100° V (400 Hz)

Axial Q / DI: 20.3 / 13.1, 1 kHz to 16 kHz

Crossover Frequency: 1.2 kHz

Recommended Signal Processing: 90 Hz high pass filter

Drivers: LF 1 x 12” weather-treated, Ferrofluid-cooled HF 1 x 1” exit, titanium diaphragm

Driver Protection: PowerSense™ DDP

Input Connection: 12 foot (4 m) SJOW #16 gauge

Controls: None

Enclosure: Hand-laminated fiberglass, gray gelcoat

Mounting/Rigging

Provisions: (5) 1/2-13 rigging points

Required Accessories: 90 Hz high pass filter

Supplied Accessories: SSYR1 grade 304 stainless steel mounting yoke

Optional Accessories: TRC400 400-watt 70/100/140-volt transformer

Dimensions—Height:24.75 inches (629 mm)

Width:24.75 inches (629 mm)

Depth:29 inches (737 mm)

Weight (without yoke): 47.5 lbs (21.5 kg)

Weight (with yoke): 55.5 lbs (25.2 kg)

Shipping Weight: 86.5 lbs (39.2 kg)

NOTES:

1. Sensitivity: Free field pink noise measurement at 40 ft (12.2 m) at 25%

power; extrapolated to 1 meter and an input of 2.83 volts RMS.

2. Watts: All wattage figures are calculated using the rated nominal impedance.

Call us at 877-776-7631  or email us at info@prosoundservice.com for most competitive price or if you have any questions about ordering this product.

The manufacturer of this product Community professional requires us to provide the following message  with any advertisement of this product.  This product is only available as part of an installed package, and is not available for over-the-counter purchase. Contact Pro Sound Service Inc. at Sales@ProSoundService.com or via telephone at 781-849-1285  for further assistance with the purchase of this product and for recommendations with designing this product into your system.