The VERIS 26 is a two-way, full-range loudspeaker system suitable for use in a wide variety of fixed installations.
This versatile model is ideal for distributed systems such as those found in cafes, restaurants, shopping centers and airports. With its powerful dual cone drivers, the VERIS 26 provides additional low frequency and mid-range output over that of its sister product, the VERIS 6.
When paired with a subwoofer such as the VERIS 210S, a VERIS 26 system will produce high-fidelity, broad spectrum sound that belies its modest size.
In addition to distributed systems, the VERIS 26 is an excellent choice for ancillary delay applications. When used to augment a FOH system in venues such as auditoria, theatres, and houses of worship, delay speakers can significantly even out the difference in sound pressure level from the front of the room to the rear of the room. Units may be positioned for underbalcony fill, overbalcony fill, or simply placed towards the rear of the seating areas. By deploying VERIS 26 loudspeakers in such a manner, the system designer will have far greater control over relative levels and relative tonal response when commissioning and equalizing the installation.
The VERIS 26 may be mounted to a wall or ceiling surface with a yoke bracket (included), suspended from its M6 threaded rigging points, or installed using an OmniMount Series 30 mounting device.
Applications
- Restaurants
- Pubs
- Cafes
- Houses of Worship
- Shopping Malls
- Airports
- Delay Fill
Features
- Internal DYNA-TECH dynamic driver protection circuitry
- Ferrofluid treated HF driver for improved heat dissipation
- Non-resonant, non-metallic HF diaphragm for reduced distortion
- Carbon ring cone technology provides 30% more piston area with increased excursion capability
- Terminal strip and NL4 compatible connectors
Specifications
- Format: Two-way full-range, vented bass, trapezoidal, dual cone drivers
- Operating Range: 70Hz-18kHz
- Frequency Response: 90Hz-10kHz (+/-3dB)
- Dispersion (-6dB): 90 H x 70 V degrees (in vertical position)
- Crossover Frequency: 2kHz
- Max SPL @ 1m: 115dB continuous/122dB peak
- Sensitivity in SPL (1W/1m, free space): 92dB (125Hz-10kHz, 1/3 octave); 92dB (250Hz-4kHz, speech range)
- Max Power Handling: 200W RMS (28.3V) 500W Program/990W peak
- Impedance: Nominal 4 ohm/min. 4.6 ohm at 230Hz
- Connectors: Terminal strip and NL4 compatible
- Low Frequency Transducer: Dual 6" 100W RMS, 250W program, 8 ohm each driver
- High Frequency Transducer: 3/4" 50W RMS 125W program, 8 ohm
- Enclosure: Trapezoidal (22.5 degree included angle) 11-ply cross-laminated birch
- Finish: Black catalyzed polyester paint
- Rigging Provisions: (9) M6 threaded rigging fittings, (4) M6 threaded fittings for OmniMount 30 bolt pattern; yoke bracket included
- Grille: Powder coated steel, black
- Dimensions (H x W x D): 22.5" x 9.8" x 10.1"
- Net Weight: 22.5 lbs