JBL Control 322CT Ceiling Speaker - Includes Pre-Attached 70-100 Volt Multi-Tap Transformer, 12-Inch Coaxial Ceiling Loudspeaker, 400-Watts, 32 Hz to 20 kHz Frequency Response, 95-dB Sensitivity, True-Broadband 90º Coverage.
|
JBL Control 322CT deliver exceptional next generation performance in a coaxial point source design ceiling loudspeaker with pre-attached 60 Watt, 70V/100V Multi-Tap Transformer. The low frequency cone performs as a true 12 inch (300 mm) diameter waveguide for the high frequencies. A unique metal throat transitions seemlessly to the horn to eliminate high frequency beaming which is common among this category of speaker. The result is a coaxial speaker with extremely consistent 90° coverage on a broadband basis. The Control 322CT is easy to install with innovative EZRail™ feature built into the metal baffle temporarily holds one side of the speaker baffle in place until the installer can affix the baffle to the backcan with screws. The removable multi-pin locking connector, with secure screw-down terminals, allows for pre-wiring the input wires for easy clip-on convenience during installation.
|
|
|
|
Consistent 90° broadband pattern control.
|
|
Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone.
|
|
Medium-format compression driver.
|
|
Extraordinary clarity for speech and vocals with extended frequency response for music.
|
|
Power handling of 400 Watts with high sensitivity provides high SPL capability.
|
|
Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
|
|
|
Model
|
Control 322CT
|
|
Product Type
|
Coaxial Ceiling Speaker
|
|
Frequency Range (-10 dB)¹
|
32 Hz – 20 kHz
|
|
Frequency Response (±3 dB)¹
|
48 Hz – 19 kHz
|
|
Coverage Pattern²
|
90° conical, broadband (Avg 1k - 16kHz)
|
|
Directivity Factor (Q)
|
9 (1k - 16kHz)
|
|
Directivity Index (DI)
|
9.5dB (1k - 16kHz)
|
|
Long-Term System Power Rating
|
400 W (1600 W peak), 2 hrs and 250 W (1000 W peak), 100 hrs
|
|
Maximum SPL
|
121 dB cont ave (124 dB peak)
|
|
Transformer Taps
|
70V: 100W, 50W, 25W, & 12.5W and 100V: 100W, 50W & 25W
|
|
Tap Connection
|
A: Common B: 12.5W@70V, 25W@100V C: 25W@70V, 50W@100V D: 50W@70V, 100W@100V E:100W@70V, n/c@100V
|
|
Net Weight
|
22.0 lbs (10.0 kg)
|
|
Shipping Weight
|
25.8 lbs (11.7 kg)
|
|
Dimensions (W x H x D)
|
366 x 366 x 240 mm
|
|
.png)
.png)