Product Details

JBL VRX932LAP Powered 12" Two-Way Line Array System with 1 x 2262FF Differential Drive® LF, 3 x 2408J HF on Constant Curvature waveguide, compact JBL DrivePack® DPC-2 amplifier module with system DSP, dual angle pole socket and integral rigging hardware, black DuraFlex(tm) finish.

• Built-in JBL DrivePack^® DPC-2 amplifier module designed in conjunction with Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
• JBL's exclusive neodymium magned Differential Drive^® woofer for high-power capacity and light-weight.
• VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
• Constant Curvature waveguide for unprecedented array coherence.
• Integral rigging hardware for simple connection of enclosures and optional array frame.
  Dual angle pole socket for aiming flexibility.
• Array Configuration Selector permits "array shading".

Application:

• Music playback and sound reinforcement in mid-size venues.
• Entertainers, corporate A/V professionals and sound system hire companies.
• Permanent Installation.

The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is

vital.

The Constant Curvature waveguide mounts three compression drivers on a continuous arc. When additional

VRX932LAP speakers are added to the array the uninterrupted arc continues. In effect, all the drivers work together as if they were a single driver on a very long waveguide. Since there are three drivers in each VRX932LAP, the combined power handling and acoustic output of the system is far greater than a single driver could achieve.

VRX932LAP uses “amplitude shading” to shape the coverage of the array. Switches on the input plate allow, for example, the upper box in an array to reach a distant balcony while the lower box is shaded back to reduce excessive level at the front of the listening area. This yields to a more coherent sound field and less feedback

problems.

One or two VRX932LAP’s may also be used on a tripod or over subwoofers. The integrated rigging hardware is used to securely lock the array together while the dual-angle pole socket provides aiming flexibility.

As many as five VRX932LAP speaker systems may be suspended in a single array for a nominal vertical coverage of up to 75°. Suspended applications require the JBL VRX-AF array frame or eye bolts (available separately).

Specifications:

Frequency Range (-10 dB): 57 Hz - 20 kHz

Frequency Response (±3 dB): 75 Hz - 20 kHz

Coverage Pattern: 100° x 15° nominal

Maximum Peak Output1: 136 dB SPL at 1m

LF Driver: 1 x JBL 2262FF 305 mm (12 in) dual voice coil Differential

Drive® woofer with neodymium-magnet

HF Driver: 3 x JBL 2408J, 38 mm (1.5 in) voice coil neodymium compression driver

Bandpass Nominal Impedance: LF: 2 x 2 ohms

HF: 4 ohms

DPC-2 Internal Amplification

Output (at nominal load): 1750 Watts Peak, 875 Watts Continuous

DPC-2 Output as (Continuous IEC shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts

DPC-2 Output Section: LF: Dual-Bridged Technology™, Class D

HF: Bridged Class D

Audio Input Connector: XLR with loop through

User Controls: Input Attenuator (0-16 dB)

ACS (Array Configuration Selector),

HF level adjustment (+3 dB, 0 dB, -3dB)

Signal Processing: DSP based, resident in Input Module

System Management: DSP based limiters for mechanical and thermal protection.

AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz

AC Line Voltage: User selectable: 120V/240V (-15%, +10%)

AC Input Connector: Neutrik PowerCon (NAC 3MPA)

AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)

AC Current Requirements: 6A per system at 120V, 3A per system at 240V

Enclosure: 25/15 mm birch plywood.

Suspension / Mounting: Optional VRX-AF line-array frame kit, 10mm forged eyebolts or

internal dual angle 36mm pole mount cup for pole or tripod mounting

Finish: Black DuraFlex™ finish

Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam

Dimensions (H x W x D): 349 mm x 597 mm x 444 mm

(13.75 in x 23.5 in x 17.5 in)

Net Weight: 24 kg (52 lb)

Optional Accessories: VRX-AF array frame, eyebolt kit part #229-00017

SS2-BK tripod speaker stand

SS3-BK satellite speaker pole

SS4-BK adjustable satellite speaker pole to be used with the

VRX918SP and SRX718S only.

Pro Sound Service Inc. is your authorized dealer of JBL Professional Products!  We are your best source for brand-new factory sealed products at great prices.

Call us Toll-Free at 877-776-7631 or email us at info@prosoundservice.com for BEST PRICE.  We'll meet or beat any authorized U.S. Dealer's price.  We adhere to MAP.